
National cost guides put typical replacement projects between $3,000 and $8,500, according to Fixr's 2026 guide. Your number depends on boiler type, fuel, capacity, efficiency, and what's already in your basement.
This guide covers current pricing, what goes into a quote, what moves the price, and how to tell when replacement beats another repair.
Key Takeaways
- Fixr's replacement range is $3,000-$8,500 (average $6,100); it doesn't itemize what's included.
- Size, fuel, efficiency, labor, venting, piping and permits all move the total.
- Like-for-like swaps cost less than fuel conversions or relocations.
- The cheapest quote can cost more over time if sizing or efficiency is off.
How Much Does Boiler Installation and Replacement Cost?
No single figure applies to every home. The main budgeting risks are underestimating labor, choosing the wrong configuration, and missing upgrades the old system never needed.
Typical Installed Cost Range
Published national figures are planning numbers, not quotes. Two useful benchmarks:
| Source | Range | Notes |
|---|---|---|
| Fixr (2026 guide) | $3,000-$8,500; average $6,100 | Replacement estimate; inclusions not itemized |
| Angi (2026 guide) | $5,100-$7,800 | 2,000 sq ft home, 60,000-90,000 Btu/h; materials and labor |
Fixr also lists fuel-specific ranges: propane $2,800-$9,000, natural gas $4,000-$10,000, and oil $4,800-$9,000.
Reliable current U.S. price bands for basic, standard, and high-efficiency tiers are hard to pin down, so the sections below describe what separates them rather than assigning dollar figures. Neither guide confirms whether permits, controls, or tax are included. Ask every contractor to spell that out.
A straightforward swap with compatible piping and venting tends to land at the low end. Fuel conversion, relocation, or major piping and electrical work pushes toward or past the top.

Entry-Level or Basic Installation
This tier suits a like-for-like replacement: existing connections are compatible, heating demand is modest, and nothing needs to move.
The trade-offs are worth weighing. Basic units may offer fewer controls, shorter warranties, or lower efficiency, which means higher fuel bills. Not every low-cost boiler has the same specifications, so compare models, not just prices.
Mid-Range or Standard Installation
A typical standard job includes:
- A properly sized unit
- Connection to the existing heating distribution
- Basic controls
- Startup testing
- Removal of the old equipment
It fits households with average heating demand, compatible existing infrastructure, and a goal of balancing upfront cost against efficiency and reliability.
High-Efficiency or Advanced Installation
Costs climb when the job adds condensing equipment, advanced controls, new venting, condensate drains, fuel conversion, relocation, or extensive piping and electrical work.
To judge whether the premium is worth it, weigh:
- Expected fuel savings (without assuming a specific payback)
- Comfort gains from modulating operation
- Warranty length
- Maintenance needs
- Expected service life, which Viessmann puts around 15 years for many boilers
Quality Comfort Solutions handles efficiency upgrades alongside new gas boiler installation in Yonkers and Westchester County.
Key Factors That Affect Boiler Installation and Replacement Cost
Separate quotes into three buckets: equipment, site-specific installation work, and ongoing ownership costs. A quote that blurs them is hard to compare.
Boiler Type, Fuel, and Efficiency
Configuration. A combi boiler provides space heat and domestic hot water in one appliance, per U.S. Boiler Company. That saves space but ties hot-water capacity to the same unit. Systems with a separate hot-water tank add equipment but handle higher demand.
Fuel. Natural gas, propane, oil, and electric each carry different venting, utility, and operating costs. EIA's 2024 New York residential energy-input prices (not cost per unit of heat):
- Natural gas: $16.03/MMBtu
- Propane: $28.69/MMBtu
- Heating oil: $34.35/MMBtu
- Electricity: $71.60/MMBtu
Efficiency. AFUE measures how much fuel becomes heat. Federal minimums for boilers made since 2021:
- Gas, hot water: 84%
- Gas, steam: 82%
- Oil, hot water: 86%
- Oil, steam: 85%

ENERGY STAR requires at least 90% AFUE for gas and 87% for oil.
Quality Comfort Solutions works on gas boilers and radiant heat; it does not service oil or steam boilers.
Home Size, Capacity, and Heating Demand
Square footage is only a starting point. Real sizing uses a room-by-room heat-loss calculation (ACCA Manual J or equivalent). That accounts for insulation, windows, climate, ceiling height, zoning, and hot-water demand. Steam systems size to connected radiators instead.
Angi's 2,000-square-foot example, 60,000-90,000 Btu/h at $5,100-$7,800, is a cost-guide illustration, not a design. Don't pick a unit from it.
Sizing errors cut both ways:
- Oversized boilers cycle on and off, wasting fuel. Viessmann no longer recommends oversizing.
- Undersized boilers struggle to hold temperature on cold days.
Installation Complexity and Site Conditions
Labor runs $1,000-$3,500 per Fixr. Most contractors include haul-away of the old unit, but some bill it separately. Costs rise with:
- Fuel conversion or relocation
- New gas lines, venting, or condensate drains
- Electrical or piping changes
- Radiator or control upgrades
- Tight access to the mechanical room

Older homes deserve one extra check. The EPA flags pipe insulation around older boilers as a possible asbestos source, so confirm that anyone handling it is accredited.
Permits matter too. Yonkers requires one before installing a heating apparatus, chimney or flue in a dwelling. Fees vary, so ask your contractor.
What an Itemized Boiler Quote Should Include
ENERGY STAR advises getting written, itemized estimates and warns that the lowest bid may cost more to run over time. Look for separate lines for:
- Boiler and accessories
- Labor
- Old-unit removal and disposal
- Permits and inspections
- Venting, piping and controls
- Startup and testing
- Taxes
- Warranty coverage
The quote should also state exclusions, assumptions about existing piping or venting, and any likely future repairs. In New York, a written contract is required for home-improvement work over $500.
Quality Comfort Solutions provides free, no-obligation estimates with upfront pricing and no hidden fees.
Operating, Maintenance, and Lifecycle Costs
Total ownership cost includes fuel or electricity, annual service, repairs, parts, water quality and control upgrades. Carrier recommends professional service at least annually. Service pricing varies by market and system, so ask your contractor for a local annual-service quote.
Water quality is model-specific. Navien's manual, for example, lists pH 6.5-8.5 and notes that damage from poor water isn't covered by warranty.
Incentives and Financing
Check current availability before counting on any of these:
- The federal 25C credit doesn't apply to property placed in service after December 31, 2025.
- NYSERDA offers loans of $1,500-$25,000 for one-to-four-family homes. These are loans, not rebates.
- National Grid's 2025 upstate brochure listed $600-$700 rebates for condensing boilers, but that's a dated example and only applies in its service area.
- Ask Con Edison whether its Comfort Ready "up to 40%" figure applies to boilers.

Eligibility depends on equipment, location, installer and program date.
Low-Cost vs. High-Cost Boilers, and How to Estimate the Right Budget
The right choice depends on heating demand, existing infrastructure, reliability expectations and how long you'll own the home.
Performance and Comfort
Pricier units often add modulating burners, better controls and quieter operation, which help with temperature consistency, zoning and radiant systems. Weil-McLain's Ultra S4 describes modulating firing without published savings figures. Simpler boilers can heat a straightforward system perfectly well.
Durability and Maintenance
Service life depends on correct sizing, installation quality, water treatment, annual maintenance, parts availability and warranty. Published warranties vary widely:
| Product | Terms |
|---|---|
| Weil-McLain Ultra Gas | Heat exchanger 12 years; other parts 5 years |
| Navien NCB-H | Labor 1 year, parts 5, heat exchanger 10 |
| Viessmann (up to 300 MBH) | Parts up to 5 years |

Long-Term Value
Paying more makes sense when efficiency, controls, compatibility or warranty protection fit your situation, such as a large home with zones. A simpler model can be adequate for a like-for-like swap with modest demand.
Build the Budget Around the Full Project Scope
Start with this checklist:
- Number of occupants and hot-water demand
- Current fuel source and available infrastructure
- Code requirements
- Expected maintenance and operating costs
When comparing estimates, look past the total. Review:
- Equipment specs and sizing method
- Labor scope, removal and permits
- Startup testing and warranty terms
- Maintenance recommendations and exclusions
Quality Comfort Solutions offers free, no-obligation estimates for boiler installation and provides licensed and insured HVAC service for homeowners in Yonkers and Westchester County.
What Most People Miss When It Comes to Boiler Cost
- Equipment price isn't the budget. Labor, disposal, permits, venting, piping, controls and commissioning can be billed separately.
- Square footage isn't a sizing method. Over-specifying capacity hurts efficiency, comfort and equipment life.
- A very low quote needs a scope check. Look for omitted infrastructure work, thin warranty coverage, skipped safety testing or code upgrades.
Skipped safety testing is more than a line-item gap. In 2024, the CPSC recalled specific U.S. Boiler gas-fired hot-water models over carbon monoxide risk. That recall is product-specific, but working CO alarms on every floor are wise regardless.
Conclusion
Boiler costs depend on equipment, capacity, fuel, efficiency, labor, site conditions and ownership needs. The right budget balances safe installation, proper sizing, efficiency, maintainability and a transparent, itemized quote. Choosing based on the lowest price alone is how homeowners end up paying twice.
Frequently Asked Questions
What is the average cost of boiler replacement?
Fixr's 2026 guide reports an average of $6,100, within a $3,000-$8,500 range. Equipment type, capacity, efficiency, labor and extra system work change the final quote.
How much does a new boiler typically cost for a 2,000 sq ft house?
Angi's example is $5,100-$7,800 for 60,000-90,000 Btu/h, including materials and labor. Square footage alone can't size a boiler, so request a professional heat-loss assessment.
How much does it cost to replace a combi boiler?
Reliable published U.S. price ranges for combi replacement are hard to find. The total depends on equipment, labor, removal, hot-water demand, existing pipework, venting, controls and any conversion work, so request a local quote.
How much does labor cost to install a boiler?
Fixr estimates project labor at $1,000-$3,500. Location, access, fuel connections, venting, permits and required upgrades all shift it.
Is replacing a boiler a big job?
A like-for-like swap is far smaller than a project involving relocation, new piping, fuel conversion, electrical work, venting or radiators. Scope decides the effort.
When should I replace my boiler?
Consider it when the unit nears 15 years, breaks down repeatedly, loses efficiency, raises safety concerns, or has costly repairs or scarce parts. Also ask whether it still meets your heating and hot-water needs.